SKULL KNIGHT 1/6. Paint work for sell available.

I got my package yesterday, Apikitt shipped it out real quick, kudos to that!

Packaging - the box was a bit soft card-boarded and it had lost some of it's shape.

IMG_4634.jpg


What I noticed was there wasn't enough bubble-wrap or packaging to keep the kit together firmly, resulting in a few broken pieces ...

IMG_4635.jpg


IMG_4636.jpg


IMG_4640.jpg


IMG_4641.jpg


IMG_4643.jpg


IMG_4648.jpg


IMG_4649.jpg


IMG_4650.jpg


IMG_4651.jpg


IMG_4655.jpg


Then came assembly, and this is my first experience with a kit ^_^ but I got e-help with a question or two (Thanks Maiku ~^_^~ ). My skills with the glue are pathetic, as you'll see below but it was pretty hard cos some broken pieces were just small.

IMG_4654.jpg


IMG_4659.jpg


There's also a strap for his shield that was glued originally and came off. I re-stuck it.

IMG_4667.jpg


Here we go with the finished assembly ...

IMG_4665.jpg


2 horns from his crown (on his skull) came off, and I re-glued em back.

IMG_4666.jpg


IMG_4668.jpg


IMG_4669.jpg


IMG_4670.jpg


IMG_4671.jpg


IMG_4672.jpg


IMG_4676.jpg


IMG_4677.jpg


IMG_4678.jpg


IMG_4679.jpg


IMG_4680.jpg


IMG_4682.jpg


Hard assembly for me because some of the paint would come off with the glue on your fingers if you weren't careful. The horns around his neck were hard to put on and hold on to while the glue worked its way.

End result - full on satisfaction! I love it!
 
IncantatioN - - I really apologize. :puck:

I need to improve on the packaging. And increase protection of fragile parts.

Thank you for point out the flaws.

About glue stain. Use sandpaper (400 - 1000 dry polish) to polish out carefully.


Diaz - - your version was cool !!! clear smoothly.
 
This is a new package that I use it is strong. And the box is wider than the old package.
That I can add more cushioning material.
I use this box sent to Mire_Elf on last Saturday. :guts:



Uploaded with ImageShack.us
 
Top Bottom