Th3Branded0ne
I'll be back.
It's finally over!
(before sanding) http://img180.imageshack.us/my.php?image=pcdv0017ao4.jpg
(after sanding) http://img166.imageshack.us/my.php?image=pcdv0019ao5.jpg
(With stain on) http://img174.imageshack.us/my.php?image=pcdv0022bg7.jpg
(Silver leaf finish) http://img301.imageshack.us/img301/8985/pcdv0035ty2.jpg
(Final Product: 2 different backgrounds, pick the one you think makes it stand out better)1. http://img263.imageshack.us/img263/2036/pcdv0037ad9.jpg
2. http://img263.imageshack.us/img263/9076/pcdv0038bx4.jpg
This next pic is about a something I thought about doing with drywall. I thought about making designs or something you would like to have in your room wall (i.e Berserk,Sports, symbols, etc. So I made this Chevy logo as a sample to see if it was possible to make it good enough with drywall and joint compound. I am not still finished but it seems that you can do it. This piece is about a foot in Length and 4 in width. So I made it look like it's coming out from the wall, but not completely true, if I wanted it to make it like the carving I could have just cut the piece of drywall and then paint it. But I added the joint compound to give it that effect. I can either leave it like that and let the light give it the shadow it needs to have that breaking through the wall effect or paint the design. I pick to leave it as it is. Give me your opinion and if you want a carving of something or something made from drywall. Send me a message here on SK.net to have details about what you might want. Later everybody
http://img263.imageshack.us/img263/5497/pcdv0039aj5.jpg
(before sanding) http://img180.imageshack.us/my.php?image=pcdv0017ao4.jpg
(after sanding) http://img166.imageshack.us/my.php?image=pcdv0019ao5.jpg
(With stain on) http://img174.imageshack.us/my.php?image=pcdv0022bg7.jpg
(Silver leaf finish) http://img301.imageshack.us/img301/8985/pcdv0035ty2.jpg
(Final Product: 2 different backgrounds, pick the one you think makes it stand out better)1. http://img263.imageshack.us/img263/2036/pcdv0037ad9.jpg
2. http://img263.imageshack.us/img263/9076/pcdv0038bx4.jpg
This next pic is about a something I thought about doing with drywall. I thought about making designs or something you would like to have in your room wall (i.e Berserk,Sports, symbols, etc. So I made this Chevy logo as a sample to see if it was possible to make it good enough with drywall and joint compound. I am not still finished but it seems that you can do it. This piece is about a foot in Length and 4 in width. So I made it look like it's coming out from the wall, but not completely true, if I wanted it to make it like the carving I could have just cut the piece of drywall and then paint it. But I added the joint compound to give it that effect. I can either leave it like that and let the light give it the shadow it needs to have that breaking through the wall effect or paint the design. I pick to leave it as it is. Give me your opinion and if you want a carving of something or something made from drywall. Send me a message here on SK.net to have details about what you might want. Later everybody
http://img263.imageshack.us/img263/5497/pcdv0039aj5.jpg